This site requires JavaScript to be enabled

Notifications

Adding the Konica MFDs to your device for printing

70 views

3.0 - Updated on 06/17/2021 by Frederick, Jon

1.0 - Authored on 06/29/2018 by Frederick, Jon

This article provides a guide to installing the Konica MultiFunction Devices (MFDs) on your unmanned device. Please note that these devices are not managed by Khoury Systems. For any issues regarding queue management, toner, or service, please contact NU Reprographics at either x2766 or MFDProgram@northeastern.edu

Windows 

Windows 7

  1. Go to Start --- > All Programs ---- > Accessories Folder ---- > Run
  2. Type in \\mfd\print queue name (the print queue name is listed on the new Konica Minolta MFD)
  3. Hit Enter
  4. Computer will install the driver and a pop-up window will appear for that specific printer
  5. In the upper left-hand corner of the pop-up window, click on “Printer” and then click on “Set as Default Printer” (optional)

Windows 10

  1. In the bottom left hand corner, click on “Type here to search”
  2. Type in \\mfd\print queue name (the print queue name is listed on the new Konica Minolta MFD)
  3. Hit Enter
  4. Computer will install the driver and a pop-up window will appear for that specific printer
  5. In the upper left-hand corner of the pop-up window, click on “Printer” and then click on “Set as Default Printer” (optional)

 

macOS

  1. System Preferences > Printers & Scanners
  2. Click the + button
  3. At the top of the Add window, click IP.
  4. In Address, enter the name of the print server mfd.nunet.neu.edu

    Please Note - The printing protocol must be set at LPD (Line Printer Daemon). If it is set at IPP (Internet Printing Protocol), this can be changed via the protocol drop down menu.

  5. In Queue, enter the printer queue name that is listed on the Konica Minolta MFD
  6. Modify the Name field to reflect the name of the printer. This is optional, but it makes it easier to distinguish between multiple printers added on the same computer.
  7. If after filling in the server and queue information you receive a notification that the printer queue cannot be identified, click the + or ADD button anyways as it will still add the printer queue.
  8. After the new print queue is installed on your Windows computer or Mac you will then choose that queue when going to send a print job. 

Khoury MFDs 

 Name Location Model Path
WVHMFD01  WVH - Room 202  Bizhub 454e  \\mfd.nunet.neu.edu\WVHMFD01
MEMFD04 Meserve Hall - Room 316  Bizhub 454e  \\mfd.nunet.neu.edu\MEMFD04
NIMFD04  Nightingale - Room 132  Bizhub 458  \\mfd.nunet.neu.edu\NIMFD04
ISEMFD02 ISEC - Room 635     Bizhub 458   \\mfd.nunet.neu.edu\ISEMFD02
ISEMFD03 ISEC - Room 535  Bizhub 287 \\mfd.nunet.neu.edu\ISEMFD03

More information:

https://web.northeastern.edu/mfdprogram/